THE START OF YOUR X CAMPER

Your shell. Your adventure.

Drag to turn · scroll or pinch to zoom

Preparing your shell

Loading the exterior model…

X Campers shell · exterior shellOriginal shell dimensions

Start with the shell

Explore the shape, choose a finish and see it on a simple vehicle base.

Your configuration specification

Review your choices and model images, then save a PDF from the print dialog.

Base vehicleMake

Cab-to-camper connectionBody option

Opening through the front wall and upper platform, based on our workshop reference. Choose Interior to inspect it.

Entry door & nose windowsStandard door size (width × height)

The opening and recessed stepwell follow the selected door size. Entrance remains on the right-hand passenger side.

Nose window size (both windows)

Under-rack storage Lower-side storage compartments

Storage stays at or above wheel-centre height and clear of the entrance stairs. Rear compartments taper upward for a minimum 20° departure line in this preview.

Window layoutSelect a windowWindow size (width × height)Move forward / rearward (mm)0 mmMove down / up (mm)0 mm

The selected window is outlined in the scene. Positions are checked for clearance from other openings.

Interior · parquet flooringParquet design

Material scale: straight boards 1,200 × 180 mm; herringbone and chevron 600 × 150 mm; timber cladding 144 mm wide. Pattern size stays fixed when the camper length changes.

Floor colour

Interior · wall claddingCladding designCladding colour

2,160 mm finished internal width. 50 mm external wall assembly including 40 mm PU foam; 4 mm interior lining, including the bunker. 5 mm parquet on the floor and stair treads. Interior colours are independent of exterior paint; pattern scale stays constant as body length changes.

Interior · shower enclosure Include shower enclosureShower interior layout

The 600 mm sliding doorway stays on the aisle-facing front panel. The toilet option shares the wet area.

1,200 × 900 mm clear inside · three 30 mm composite panels bonded to the camper wall · 930 mm overall depth · 600 mm sliding doorway · 75 mm water-retaining threshold.

Crawl-through builds reserve 300 mm between the finished bunker neck and shower wall for battery cabinetry.

Inside shower finishOutside shower-wall finish Open sliding shower door

Interior · wardrobe Include full-height wardrobe

Beside the shower · 200 mm clear internal width · 236 mm overall width · 600 mm depth · 18 mm laminated MDF · front-to-back hanging rail for long garments.

Open wardrobe door

Fixed 300 mm storage beside the wardrobe. Extra body length extends the sofa.

Interior · fitted kitchen

Cabinet carcasses, shelves and fronts: 18 mm laminated MDF.

Include fitted kitchenKitchen layoutCounter size (width × depth)

The rear full-height cabinet adds 552 mm to the selected counter length. The kitchen has one window; the rear window belongs to the sofa area.

Rear overhead cabinet designOverhead opening mechanism

All overhead doors lift upward with soft-close gas struts. All cabinet fronts align at 400 mm depth.

Kitchen sink sizeCabinet finishOpen cupboards & drawers

596 × 820 × 590 mm under-counter fridge, kitchen overhead microwave, RV hood and induction hob; inset sink, mixer tap, travel latches, drawer runners and warm LED profiles at the wall junction and ceiling edges. 950 mm worktop height · 600 mm counter depth · 400 mm uniform overhead depth, including the close-fitting ventilated microwave bay.

Minimum kitchen footprint: 1,000 × 600 mm.

Interior · bunker bed Include bunker mattress and bed deckFold bed for crawl-through access

Bunker mattress footprintClearance above mattress at neck

Interior · rear loungeRear seating layoutUpholstery and lounge finishConvert seating to bed

Seating at 0% · bed at 100%. Pull-out trays or the lowered table rest on fixed support ledges; back cushions fill the centre. Cabinet boards are 18 mm with laminated finishes.

Sleeping surface

Shell & vehicle finish

One finish for the shell, entrance door and vehicle body.

Shell dimensions

FitOriginal shell

WheelbaseChoose a vehicle

Overall length—

Width—

Bunker clearance—

Height—

Body length follows wheelbase, with a minimum length to retain the selected openings. Rear overhang requires workshop confirmation. Cab choice adjusts the cab-over length; wheelbase adjusts the rear body. Door and window sizes, shell width and height stay fixed. Factory wheelbases follow published specifications; vehicle styling and cutout dimensions remain visual references, not fabrication drawings.

Request another vehicle

Tell us the make, model, year and cab you would like. Your request helps us choose the next vehicles.

Vehicle details

Model references & dimensions

GMC mesh adapted from 2020 Sierra AT4 by Ghøst; styling is not exact 2025 HD CAD. Ford mesh adapted from 2023 F-550 XL crew chassis by Vehi3d Project. Cab variants are reshaped references.

GM body-builder dimensions · Ford wheelbase specifications